PTFE EXTRUDED/MOLDED ROD

 Diameter 1-5mm rods are made of polytetrafluoroethylene resin by paste extrusion processing;Diameter 6-200mm rod selection suspension PTFE resin made by plunger processing;Diameter more than 200mm rods by molding production.

 TypeDiameter (mm)Length (mm)PTFE Extruded Rod4, 5, 6, 7, 8, 9, 10, 13, 15, 16, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 100, 120, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 2501000, 2000, 3000As Custom’s RequestPTFE Molded Rod180, 200, 250, 270, 300, 350, 400, 500, 600100-300PropertiesUnitResultApparent DensityG/cm³2.10~2.30Tensile Strength (mm)Mpa14.0Elongation At Break%140Note: When the dismeter of rod is larger than 16mm, only test apparent densityChemical:can be used as anti-corrosion materials, can manufacture a variety of anti-corrosion parts, such as pipes, valves, pumps and fittings joints. Chemical equipment, can be produced reactor, distillation column and anti-corrosion equipment lining and coating. Mechanical:can be used as self-lubricating bearings, piston rings, oil seals and seals. Self-lubrication can reduce wear and heat and reduce power consumption.Electronic and electrical aspects: mainly used in the manufacture of various wire and cable, battery electrodes, battery separator, printed circuit boards.